Restor-A-Finish Furniture Restoration
An easy solution to add luster and correct minor scratches without having a major refinishing project!
Prep Time10 minutes mins
Active Time10 minutes mins
Total Time20 minutes mins
Keyword: antique restoration, furniture restoration, Restor-A-Finish
- 1 0000 Fine Steel Wool if deep scratches require it
- 1 container Howard's Restor-A-Finish color to match furniture
- 1 cloth soft to add Restor-A-Finish
- 1 cloth soft to remove Restor-A-Finish
- 1 piece Brown Craft Paper large enough to protect area beneath furniture
- 1 pair vinyl gloves
- 1 container Howard Feed-N-Wax
Wipe down/clean the piece of furniture that needs restoration before beginning project.
Select the color of Howard's Restor-A-Finish that best matches the finish on the furniture you want to restore.
Place furniture on brown craft paper and/or towels to protect the area which you are working.
Wearing gloves, shake the Restor-A-Finish and add to the 0000 steel wool or soft cloth to apply onto the furniture. A soft cloth often will work if there are not a lot of scratches that need the steel wool to smooth out and get the product into the wood.NOTE: DO NOT APPLY DIRECTLY TO WOOD! Apply with the grain of the wood.
Immediately use another soft cloth and wipe off the product.
If desired, wait 30 minutes and apply Howard Feed-N-Wax to protect the restored finish.
This process and product are amazing!
If water rings or scratches are a problem and your piece just needs a product to cover and add luster to the finish, this is a perfect solution.